Static Routing Configuration

How to Configure Static Routing in GNS3

STATIC ROUTING NETWORK TOPOLOGY:-

1

  • Static routing is one of the basic routing protocol in computer networking.
  • Its is configured by administrator manually.
  • Administrator must want to know source and target Network details.
  • Its is very secure and fast routing protocol.
  • It is used for small organization.
  • Static routing protocol supporting 10 to 15 Routers.
  • Administrating distance for static routing is 0 and 1.
  • It is trustworthiness of the routing information.
  • It is leaser Administrative distance and higher performance.

R1 ROUTER INITIAL CONFIGURATION:-

Router>enable
Router#conf terminal
Router(config)#hostname R1
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#interface serial 0/0/0
R1(config-if)#ip address 192.168.3.1 255.255.255.0
R1(config-if)#clock rate 72000
R1(config-if)#no shutdown
R1(config-if)#exit

R2 ROUTER INITIAL CONFIGURATION:

Router>enable
Router#conf terminal
Router(config)#hostname R2
R2(config)#interface fastEthernet 0/0
R2(config-if)#ip address 192.168.2.1 255.255.255.0
R2(config-if)#no shutdown
R2(config-if)#exit
R2(config)#interface serial 0/0/0
R2(config-if)#ip address 192.168.3.2 255.255.255.0
R2(config-if)#clock rate 72000
R2(config-if)#no shutdown
R2(config-if)#exit

R1 ROUTER STATIC ROUTING CONFIGURATION:

Syntax:
R1(config)#ip route Destination Network| Destination N/W Subnet Mask |Next Hop Address
R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.3.2
R1(config)#exit
R1#sh ip route

R1

R2 ROUTER STATIC ROUTING CONFIGURATION:

R2(config)#ip route Destination Network| Destination N/W Subnet Mask |Next Hop Address
R2(config)#ip route 192.168.1.0 255.255.255.0 192.168.3.1
R2(config)#exit
R2#sh ip route

R2

SAVE ROUTER R1 CURRENT RUNNING CONFIGURATION:

R1#copy running-config startup-config
R1(config)#exit

SAVE ROUTER R2 CURRENT RUNNING CONFIGURATION:

R2#copy running-config startup-config
R2(config)#exit

VIEW ROUTER R1 RUNNING CONFIGURATION:

R1#sh running-config

VIEW ROUTER R2 RUNNING CONFIGURATION:

R1#sh running-config

WATCH AND LEARN  STATIC ROUTING VIDEO

Related posts

Leave a Comment