DHCP Server Configuration in Windows Server

DHCP Server Configuration in Linux
DHCP Server Network Topology

DHCP TopologyPrerequisites:
01. A computer running windows 2003 server or DHCP Server.
02. A computer running windows 2003 server or DHCP Client.
DHCP Server
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Preferred DNS 192.168.1.1
DHCP Client 1 and 2
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Preferred DNS 0.0.0.0
How to Install DHCP Service in 2003
01. Go to Start–>Settings–>Control Panel–>Add/Remove Programs.

Start-->Settings-->Control Panel-->Add/Remove Programs. 02. Select Add/Remove Programs box–>click Add/Remove Windows Components.

Add/Remove Programs box-->click Add/Remove Windows Components. 03. Highlight Networking Services in the Windows Components Wizard box, and click Details.

Highlight Networking Services04. Select the check box next to Dynamic Host Configuration Protocol In the Networking Services, click OK.

Select the check box next to Dynamic Host Configuration Protocol05. Click Next button in the Windows Components Wizard box,

Windows Components Wizard box 06. Windows 2003 DHCP server installation has been completed the click Finish button.

Finish button Authorizing DHCP server
07. Go to Start–>Programs–>Administrative tools–>DHCP

Start-->Programs-->Administrative tools-->DHCP 08. Then Right click the Server Name–>Select Authorize, and refresh it.

Server Name-->Select Authorize,

Creating a DHCP scope
09. Go to Start–>Programs–>Administrative Tools–>DHCP.

Start-->Programs-->Administrative Tools-->DHCP. 10. Then Right click the Server Name–>then select New Scope, for creating a new DHCP scope.

Server Name-->then select New Scope, for creating a new DHCP scope. 11. New Scope wizard was started. then Click Next.

11 12. In the DHCP scope screen, type the DHCP name and a description for creating new scope. Click Next.

DHCP name and a description for creating new scope. Click Next. 13. Enter “Start IP address” and “End IP address” given text boxes, subnet mask. then Click Next.

13 14. Note: Given network is DHCP server Network .
15. If we need can enter the start and ending range of IP Address. other wise exclude IP addresses.
16. To Keep it DHCP default lease duration of eight days, then click Next.

DHCP default lease duration of eight days 17. If we need to configure DHCP Options then configure on this screen,(Default Router,DNS,and WINS). Click Next.

17

18. Enter the IP address of the Router in Default Gateway router screen, Click Next.

18 19. Enter the Domain Name and DNS Servers IP Address in this screen Click Add–>click next.

19 20. If we not required WINS server settings just keep blank then Click Next.

20 21. Select yes option for to activate the Scope now. then click finish

activate the Scope now for start the DHCP Service 22. Created windows server DHCP scope displayed on Right side Pane.

DHCP scope displayed on Right side Pane Verification: In DHCP Client
23. Go to Client Network settings set TCP/IP Properties and select Obtain IPADDRESS automatically–>then click ok

TCP/IP Properties and select Obtain IPADDRESS automatically 24. Open the command Prompt–>the below commands to get the New DHCP IP Address from DHCP Server.

ipconfig /release 25. ipconfig /renew

ipconfig /renew 26. ipconfig /all to verify the IP configuration details.

ipconfig /all 27. Same above steps 23, 24, 25, 26 follow on second client.

28. Watch video and Learn DHCP Server Configuration.

Related posts

Leave a Comment