Default Routing Configuration in GNS3

Default Routing Configuration in GNS3

Default Routing Network Topology:

topology
What is Default Routing?
1. Default Routing protocol is configured for unknown destination.
2. Generally used in the internet where the destinations are unkno
For Example: The Address of the www.google.com is unknown.
3. Configured at end points means default gateway router.
4. It is the last preferred routing protocol
Default Routing Router Configurations:
R1 Router Interface Configuration:
R1#sh ip interface brief
R1-1 R1#conf terminal
R1 Router 10.0.0.0 Network Interface Configuration:
R1(config)#interface serial 0/0
R1(config-if)#ip address 10.0.0.1 255.0.0.0
R1(config-if)#no shutdown
R1(config-if)#exit
R1 Router 192.168.1.0 Network Interface Configuration:
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#exit
R1#sh ip interface brief
R1-2 R1 Router Default Routing Configuration:
R1(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0
R1#sh ip route
r1-table
R2 Router Interface Configuration:
R1#sh ip interface brief
R2-1 R1#conf terminal
R2 Router 10.0.0.0 Network Interface Configuration:
R2(config)#interface serial 0/0
R2(config-if)#ip address 10.0.0.2 255.0.0.0
R2(config-if)#no shutdown
R2(config-if)#exit
R2 Router 192.168.2.0 Network Interface Configuration:
R2(config)#interface fastEthernet 0/0
R2(config-if)#ip address 192.168.2.1 255.255.255.0
R2(config-if)#no shutdown
R2(config-if)#exit
R1(config)#exit
R1#sh ip interface brief
R2-2 R2 Router Default Routing Configuration:
R2(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0
R2#sh ip route
r2-table
Watch Default Routing Video and Learn Default Routing.

Related posts

Leave a Comment